Inconel 600 Tube, Alloy 600 Tubing ASTM B163 B167 ASME SB163 SB167 N06600 Inconel 600 Alloy Pipe

Inconel 600 Tube, Alloy 600 Tubing (2.4816) Characteristic as below:

1.Good corrosion resistance property for the reduction, oxidation, Nitric and other media.
2.Good stress corrosion cracking resistance properties in both room temperature and high temperature.
3.Good corrosion resistance of the dry chlorine and chlorine hydride.
4.Good mechanical properties when in the condition of below zero, room temperature and high temperature.
5.Good anti-creep rupture strength, with the recommendation of 700℃ or above working environment.

Inconel 600 Tube, Alloy 600 Tubing Corrosion resistance
600 have corrosion resistance to many kinds of corrosive media. Chromium content made it with better corrosion resistance than Nickel 99.2 (alloy200) and Nickel 99.2 (alloy201,low carbon) in the oxidize environment. Meantime, high Nickel content make this alloy with good corrosion resistance in the reduction condition and alkaline solution, and also effective avoid chlorine-iron stress corrosion cracking. 600 have good corrosion resistance in the acid, acetic acid, formic acid, stearic acid and other organic acid, with medium corrosion resistance in the inorganic acid.

The alloy with excellent corrosion resistance in the first and the second recycling use of the high purity water in the nuclear reactor. Especially excellent corrosion resistance to dry chlorine and chlorine hydride applied up to 650℃. When nder the high temperature, annealing and state solution alloy have good antioxidant off and high-intensity in the air, 600 can resist the ammonia, nitriding and carburizing atmosphere, but at the turn of the changes in redox conditions, it will be corrosion by parts of oxidation media.

The high nickel content of alloy 600 2.4816 provide good resistance to moderate levels of reducing conditions. The nickel content of the alloy renders the alloy extremely resistant to chloride stress corrosion cracking. Alloy 600 is one alloy used in solutions of magnesium chloride. In strong oxidizing solutions like hot, concentrated nitric acid, Alloy 600 has poor resistance.

Inconel 600 Tube, Alloy 600 Tubing Chemical composition:

Alloy	%	Ni	Cr	Fe	C	Mn	Si	Cu	P	S
ASTM B163 N06600	Min.	72.0	14.0	6.0
	Max.		17.0	10.0	0.15	1.0	0.5	0.5		0.015

ASTM B163 B167 N06600 Physical properties:

Density / Specific Gravity	8.47g/cm³
Melting Point	1370-1425°C

Inconel 600 Tube, Alloy 600 Tubing Standard SpecificationsDIN 17550 DIN 17552 2.4816

Pipe Smls	Pipe Welded	Tube Seamless	Tube Welded	Sheet/Plate	Bar	Forging	Fitting	Wire
ASTM B167	ASTM B517	ASTM B163	ASTM B516	ASTM B168 DIN 17550	ASTM B166 DIN 17552	ASTM B564	ASTM B366

ASME SB163 Standard Specification for Seeamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes

ASME SB165 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube

ASME SB167 Standard Specification for Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617),and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube

ASME SB407 Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube

ASME SB423 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, N08221, and N06845) Seamless Pipe and Tube

ASME SB444 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube

ASME SB622 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube

ASME SB668 UNS N08028 Seamless Pipe and Tube

ASME SB690 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube

ASME SB729 Standard Specification for seamless UNS N08020, UNS N08026, and UNS N08024 nickel alloy pipe and Tube

Mechanical Properties

N06600 Alloy minimum Mechanical properties in the room temperature:

Aolly status	Tensile strength ksi MPa	Yield strength R P 0. 2 ksi MPa	Elongation%	Brinell hardnessHB
Annealing treatment	80 ( 550)	35 (240)	30	≤195